Wuxi Yu'an Technology Co.,Ltd
Wuxi Yu'an Technology Co.,Ltd
Add to Cart
Top Homogenization Ointment Emulsifying Machine Cosmetic Cream Vacuum Homogenizer Mixer
The Vacuum Emulsifier Homogenizer is a complete system for manufacturing viscous emulsion,dispersion and suspension in either small-scale or large-scale cosmetic,pharmaceutical,food and chemical industries.
What is unique about the Vacuum Emulsifier Homogenizer compared with other types of mixers is it utilizes the many significant functions of vacuum to improve the performance of mixing and product handling and to achieve the best mixing results.
Controlling the mixing environment into a vacuum state will not only prevent aeration which will lead to mixing blade degradation,but will also attain void-free end product mixtures.
How the Vacuum Emulsifier Homogenizer works is very simple.First,the materials are introduced into the mixing tank.The emulsifying mixing tank contains fixed impellers with holes which promotes thorough mixing.During operation,the blades simultaneously rotate in forward and reverse rotation at variable speeds.
High speed mixing is initiated by forward mixing and reverse mixing initiates low mixing.The forward blade will convey the material up and the reverse blade will convey the material down.Depending on the application of the mixing unit,the client may choose from a number of Ginhong Vacuum Emulsifying Homogenizers based on working capacity and speed.
Materials will be continuously loaded and mixed by these two opposite forces,and will eventually be thrown out in the middle by centrifugal force.This is done repeatedly until the materials are completely mixed,dispersed and homogenized.Afterward,the heat from the jacket is quickly transferred to every part through the inside wall.
The equipment works completely under vacuum by the aid of the vacuum pump forcing the air out of the mixing tank.The vacuum protective sensor will keep the liquid pressure in normal state.In this scenario,it is assumed that less to no excess air is inside the system.
Specific parameter requirements of emulsifier:
| 10L emulsifying pot | Specific parameters |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching water phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching oil phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Design capacity | 10L |
| Working capacity | 8L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Service life | Over 10 years |
| Homogenizer power | 0.55 KW |
| Homogenizer speed | 2800 |
| Homogenization mode | Upper homogenization |
| Lid opening method | Manual or electric |
| Heating method | Electric heating |
| Discharge method | Inclined discharge |
| Sandwich operating pressure | 0.3 MPa |
| Vacuum degree in the pot | -0.09 MPa |
| Overall dimensions (m) | 0.8*0.55*1.43 |
| Wearing parts | 1 year spare parts. spare parts |
| Warranty Period | More than 1 year |
| Installation and | The supplier is responsible for commissioning |
| Matching water phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Sandwich operating pressure | 0.3 MPa |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Down stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
| Matching oil phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Upper (lower) stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg