Wuxi Yu'an Technology Co.,Ltd
Wuxi Yu'an Technology Co.,Ltd
Add to Cart
Vacuum Emulsifying Mixer Machine Emulsifier Homogenizer Mixer For Cosmetic Manufacturing
Product Description
The Product Is Mainly Applied In Such Industries As Daily Chemical Care Products, Food Industry, Paint And Ink, Nanometer Materials, Petrochemical Industry, Printing And Dyeing Auxiliaries, Pulp & Paper, Pesticide, Fertilier, Plastic & Rubber, Electrics And Electronics, Fine Chemical Industry, Etc. The Emulsifying Effect Is More Prominent For Materials Of High Base Viscosity And High Solid Content.
Features:
1.Complex Scraping Board Blending Oar Is Suitable To Every Kind Of Complicated Recipe And Achieve Optimizing Effect;
2. Polytetrafluroethylene Scraping Board Cater To Body Of Blending Groove And Scrape Out Viscosity Material On Boiler Wall;
3.Homogenizer Is Installed On Boiler Bottom To Increase Motor Power More Thoroughly And Strongly. During Fewproduction, It Can Exert Homogenizing Effect Fully;
4.Mightiness Balance Isotactic Curve Rotor Is Matched With Stator With Corresponding Structure To Realize Liquid High -Capability Cut,Rubbing,Centrifugal To Make Sure Exquisite And Slick Cream; Boiler Body And Pipe Surface Mirror Polishing 300EMSH (Sanitation Grade) Accords With Daily Chemical And GMP Regulation.
5.Homogenizing Vacuum Emulsifier Mixer Can Choose Frequency Conversion Timing Homogenizer And Highest Rotate Speed Is 3600 r/Min
Specific parameter requirements of emulsifier:
| 10L emulsifying pot | Specific parameters |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching water phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Matching oil phase pot | |
| Enclosure material/thickness | 304L/3mm |
| Inner Layer Material/Thickness | 316L/3 mm |
| Sandwich material/thickness | 304L/3 mm |
| Design capacity | 10L |
| Working capacity | 8L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Service life | Over 10 years |
| Homogenizer power | 0.55 KW |
| Homogenizer speed | 2800 |
| Homogenization mode | Upper homogenization |
| Lid opening method | Manual or electric |
| Heating method | Electric heating |
| Discharge method | Inclined discharge |
| Sandwich operating pressure | 0.3 MPa |
| Vacuum degree in the pot | -0.09 MPa |
| Overall dimensions (m) | 0.8*0.55*1.43 |
| Wearing parts | 1 year spare parts. spare parts |
| Warranty Period | More than 1 year |
| Installation and | The supplier is responsible for commissioning |
| Matching water phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Sandwich operating pressure | 0.3 MPa |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Down stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
| Matching oil phase pot | |
| Design capacity | 5L |
| Working capacity | 4L |
| Enclosure material/thickness | 304L/Standard |
| Inner Layer Material/Thickness | 316L/Standard |
| Sandwich material/thickness | 304L/Standard |
| Lid opening method | Movable lid opening |
| Heating method | Electric heating |
| Discharge method | Upper suction material |
| Stirring mode | Upper (lower) stirring |
| Stirring power | 0.025 KW |
| Stirring speed | 1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg
